Swap B button with LT or RT -difficult

From Wiki-Scene

1 Disclaimer & Credit
2 Introduction
3 Required Supplies
4 The Mod

Disclaimer & Credit

This tutorial originally written by xboxexpert of xbox-scene, whom takes no responsibility for any damage you may cause to your equipment by attempting this.

[edit]

Introduction

Listen up here. I know most people will not attempt this mod due to its extreme difficulty but this is what I do so be amazed

A customer wanted to swap B with Left Trigger. Over 10 people on the scene said it could not be done. Here I am to show you that this is not only the second time I'm doing it for him but this is proof for those people who say it cant be done....ITS DONE.

[edit]

Required Supplies

Soldering iron
Solder
some thin wire

[edit]

The Mod

[edit]

Step 1 : Preparing the traces

First off open your controller and locate the A,B,Y,X button pads. Scrape the stuff that covers the traces and the pad with a razor blade arc'ed on its side. BE CAREFUL you can easily cut the trace. http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01795Large.jpg

[edit]

Step 2 : removing the trigger of choice

Next you need to remove the Left or Right Shooting Trigger's depending on what you want to have access to LB or RB. In this tutorial we are doing LT. http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01796Large.jpg

[edit]

Run two more wires from the top leg's of the button. The button is going to feel loose but it will not come off the post trust me. http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01803Large.jpg

Now heres the HARD part. You need to solder the two wires off the top post of the button to the small pad that used to be connected to the trace of B. Then you need to solder the backside two wires to the actual traces of B. http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01806Large.jpg

[edit]