Loose play and charge battery pack fix
From Wiki-Scene
Contents |
Disclaimer
This tutorial originally written by xboxexpert of xbox-scene, whom takes no responsibility for any damage you may cause to your equipment by attempting this.
Introduction
Okay myself and others on the forums have been having trouble with the play and charge battery pack's barely touching the pins and hardly charging or not even touching the pins resulting in the controller turning off while playing or shaking the controller. Its been bugging me so I decided to try a few things and came up with this.
Required Supplies
- Soldering Iron
- Some Electronics Solder
The Fix
What you have to do is drop a dab of solder on each points. What that will do is raise the points up due to the solder being there and enable you to get full connection between the pins on the controller and the battery pack. Enjoy the pics. This is soo simple to do a novice solderer can do it.
Before
http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01825Large.jpg
After
http://img.photobucket.com/albums/v205/xboxexpert/xbox360tutorials/DSC01826Large.jpg
--grim_d 16:41, 31 Jul 2006 (EDT)
